B对FeCoCrNiSiBx高熵合金激光熔覆层组织和硬度的影响

采用激光熔覆制备了FeCoCrNiSiB_x高熵合金熔覆层,利用光学显微镜、扫描电镜、X射线衍射仪和显微硬度计研究微量硼元素(摩尔比x=0、0.02、0.04、0.06、0.08)对FeCoCrNiSiB_x高熵合金熔覆层组织和硬度的影响。结果表明:无B高熵合金涂层组织主要为胞状晶。B的添加会促进枝晶的生成,逐渐形成鱼骨状树枝晶,但过量的B会破坏枝晶完整性,形成蠕虫状晶。此外,高熵合金熔覆层组织为FCC和BCC双相结构,B元素的添加会形成大量0.1~2.6 μm的Cr₂B第二相,有助于提高熔覆层硬度,其中x=0.06时激光熔覆层的硬度最高,约为537 HV0.2。     

Random poly(ε‐caprolactone‐L‐alanine) by direct melt copolymerization

A series of random polyesteramides (PEAs) with a range of molar composition from 90/10 to 50/50 were synthesized by direct melt polycondensation of ε‐caprolactone and l ‐alanine. Their structure was fully characterized by Fourier transform IR and NMR spectroscopy. The resulting copolymers are completely amorphous with the exception of PEA‐90/10 which possesses a semicrystalline structure. These PEAs present increasing glass transition temperatures at increasing l ‐alanine contents and exhibit fairly good thermal stability with 10% mass loss temperatures reaching 315 °C. © 2020 Society of Industrial Chemistry     

35CrMo钢表面铁基激光熔覆层的组织和耐磨性能

采用CO2激光熔覆装置将LC3530铁基粉熔覆在35CrMo钢基体表面,研究了熔覆层的显微组织、硬度和耐磨性能,并与基体的进行对比。结果表明:基体组织为回火索氏体,晶粒尺寸在20μm左右,而熔覆层的组织为均匀细小的等轴晶,晶粒尺寸大多在8μm;基体的平均硬度为254.1HV,而熔覆层的平均硬度为640.5HV,且硬度分布更加均匀;在相同试验条件下,熔覆层试样的磨损量仅为基体试样的1/7,磨损系数是基体试样的1/5,且磨损后熔覆层试样的表面粗糙度较磨损前的大幅下降,表明激光熔覆后35CrMo钢的耐磨性能得到显著提高;基体试样的磨损机制为犁削磨损,而熔覆层试样的磨损机制为微观切削,其优异的耐磨性能与含有铁、铬、钼和碳等元素的高硬度合金碳化物的形成有关。     

Effect of CaO mineral change on coal ash melting characteristics

The change of mineral composition in ash and the effect of CaO on the melting characteristics of coal ash were studied by adding different contents of CaO to coal ash. At the same time, the Factsage thermodynamics software was used to simulate the mineral changes in the synthetic ash to support and verify the experimental results. The results show that with the increase of CaO content, the melting characteristic temperature of coal ash first decreases and then rises. After adding a certain amount of CaO, the quartz with higher melting point completely disappears, and the melting point of the coal ash reaches a minimum value. And with the increase of CaO content, the appearance of wollastonite and single crystal calcium oxide mineral makes the melting point of coal ash gradually increase. It can be seen from the phase diagram calculated by Factsage that as the CaO content increases, the corresponding position of the coal ash gradually moves from the hematite region to the calcareous region. And the phenomenon of low temperature eutectic occurs when the CaO content is 35%, which is consistent with the trend of temperature change of the melting characteristics. These phenomena all indicate that the change in the melting point of coal ash is nonlinear as the content of CaO minerals increases.     

Effect of low-pressure carburizing and plasma nitriding on mechanical properties and fatigue endurance limits of low alloy sintered steels

ABSTRACT

Thermochemical treatments like plasma nitriding or surface carburizing are commonly used to enhance surface hardness of steel components. An important difference between these treatments is the temperature at which they are carried out. In the present paper, the surface carburizing was carried out following a recently reported non-isothermal low pressure carburizing (LPC) treatment. In order to gain a comparative view of the effect of different treatments on the microstructure, microhardness, fatigue and impact properties, materials with distinct hardenability and widely used in the industrial production were evaluated. Tests were also carried out using industrially processed components aimed to an application demanding high wear resistance. The microstructural evolution during case hardening was studied by optical and electron microscopy.     

浅析煤矿综采放顶煤安全开采问题

以煤矿放顶煤安全开采问题为对象开展分析探究。结合具体工程实际,在分析综放工艺技术特征的基础上,对综采放顶煤安全开采需注意的问题与防范措施开展深入分析,希望能够为其他矿井综放开采的有效开展提供借鉴和帮助。     

Time-Resolved Structural Kinetics of an Organic Mixed Ionic–Electronic Conductor

The structure and packing of organic mixed ionic–electronic conductors have an especially significant effect on transport properties. In operating devices, this structure is not fixed but is responsive to changes in electrochemical potential, ion intercalation, and solvent swelling. Toward this end, the steady-state and transient structure of the model organic mixed conductor, poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS), is characterized using multimodal time-resolved operando techniques. Steady-state operando X-ray scattering reveals a doping-induced lamellar expansion of 1.6 Å followed by 0.4 Å relaxation at high doping levels. Time-resolved operando X-ray scattering reveals asymmetric rates of lamellar structural change during doping and dedoping that do not directly depend on potential or charging transients. Time-resolved spectroscopy establishes a link between structural transients and the complex kinetics of electronic charge carrier subpopulations, in particular the polaron–bipolaron equilibrium. These findings provide insight into the factors limiting the response time of organic mixed-conductor-based devices, and present the first real-time observation of the structural changes during doping and dedoping of a conjugated polymer system via X-ray scattering.     

中国大气田科学开发的内涵

大气田是指天然气探明地质储量超过300×10~8 m~3、天然气峰值年产量在10×10~8 m~3以上且具有一定稳产期的气田。其是中国天然气储产量快速增长和未来长期稳定发展的重要基础,也是保障我国供气安全的关键。通过对国内外260余个大气田开发实践的系统分析和典型气田的解剖模拟,综合研究了大气田科学开发的内涵、核心技术以及全生命周期指标体系。大气田科学开发的内涵包括:①提出以"识别水、控制水、治理水"为技术体系的天然气开发理念,即常规气田"控水开发"、非常规气田人工压裂"注水开发",根据气藏类型和气藏特征,确定合理的采气速度;②综合评价气田开发经济效益和社会效益,保障气田长期稳产;③根据气井生产特征和储层发育特征,选取适用的气田稳产方式;④依据对常规与非常规气藏不同开发阶段的精细描述、气藏开发特征和生产动态的监测,确定气田可采储量、气田水与人工注水开发规律、气田提高采收率技术对策、气田效益稳产期与发展战略。大气田科学开发的核心技术包括:规模优化技术、科学布井技术、均衡开采技术和深度挖潜技术。进而综合优选出产量、压降、采出程度、单位压降产量等多个参数作为评价大气田科学开发的关键指标,建立了高压、低渗透—致密、裂缝—孔隙型和页岩气等4类气藏的全生命周期指标体系。结论认为,该研究成果有助于指导不同类型大气田的科学开发,进一步促进我国天然气产业的快速发展。     

Morondava盆地西部侏罗纪断陷盆地构造特征

系统分析了Morondava盆地西部侏罗纪断陷盆地构造特征,实可分为东部断陷带、中部断裂构造带和西部侏罗系残留斜坡带,可能存在有断鼻型、背斜型、地层剥蚀尖灭型、断块型、古潜山及岩性圈闭。     

Unpatterned Bioactive Poly(Butylene 1,4-Cyclohexanedicarboxylate)-Based Film Fast Induced Neuronal-Like Differentiation of Human Bone Marrow-Mesenchymal Stem Cells

Herein, we present poly(butylene 1,4-cyclohexanedicarboxylate) (PBCE) films characterized by an unpatterned microstructure and a specific hydrophobicity, capable of boosting a drastic cytoskeleton architecture remodeling, culminating with the neuronal-like differentiation of human bone marrow-mesenchymal stem cells (hBM-MSCs). We have used two different filming procedures to prepare the films, solvent casting (PBCE) and compression-moulding (PBCE*). PBCE film had a rough and porous surface with spherulite-like aggregations (Ø = 10–20 μm) and was characterized by a water contact angle = 100°. PBCE* showed a smooth and continuous surface without voids and visible spherulite-like aggregations and was more hydrophobic (WCA = 110°). Both surface characteristics were modulated through the copolymerization of different amounts of ether-oxygen-containing co-units into PBCE chemical structure. We showed that only the surface characteristics of PBCE-solvent-casted films steered hBM-MSCs toward a neuronal-like differentiation. hBM-MSCs lost their canonical mesenchymal morphology, acquired a neuronal polarized shape with a long cell protrusion (≥150 μm), expressed neuron-specific class III β-tubulin and microtubule-associated protein 2 neuronal markers, while nestin, a marker of uncommitted stem cells, was drastically silenced. These events were observed as early as 2-days after cell seeding. Of note, the phenomenon was totally absent on PBCE* film, as hBM-MSCs maintained the mesenchymal shape and behavior and did not express neuronal/glial markers.